38
PMT - Rev. 05 - Sep/22
7. Adjustments and operations
Joint bar of the sliding blades adjustment
To adjust all sliding blades at once, it is necessary to put the joint bar (A) between the
bar fasteners of the sliding blade adjuster.
The fasteners (B) must be locked on the sliding blade (C) articulator using a flat washer
and nut.
It is necessary to maintain the articulators (C) on the same position and then tighten
the bolts of the fasteners (B) on the joint bar.
Adjust every sliding blade at once
through the adjusting bolt (D) using the
adjuster (E) that can be found fastened
on the rear part of the equipment.
ATTENTION
- To finish the adjustment, repeat the same procedures on every row unit.
A
A
B
B
C
C
D
D
E
E
Summary of Contents for PMT
Page 1: ...OPERATOR S MANUAL PMT PMT...
Page 60: ...58 PMT Rev 05 Sep 22 11 Notes...
Page 62: ...www marchesan com br...
