Tascam SX-1 Reference Manual Download

Page: 66 / 213

Part IV–Mixer Controls

TASCAM SX-1

Reference Manual

Aux Send Masters

Master levels for the Aux Sends are reached through
the Fader Banks. To see them on the VGA, make
sure the

Mixer

screen is selected (press

MIX

in the

MAIN DISPLAY MODE

. From the

FADER BANK

section, press

BANK MODE

so that the

<PRESET>

LED is on.
Then press

BUSS/ AUX

to reach this screen.

TIP

Keep in mind that it’s not necessary to have a

Fader

screen up just to move an Aux send level. If the Aux
send fader bank has been recalled to the surface, you
can just move the faders directly on the mixer while
leaving a different screen on the display.

LCD Aux Send Controls

Aux Send controls on the LCD are available directly
on the

MIXER CHANNEL

screen.

Press either

MIXER

CHANNEL

in the

MAIN

DISPLAY MODE

section. Use the keypad’s arrow

keys to scroll to the Aux Send field you want to
adjust. Then use the soft knobs to adjust the Aux
Sends.

Summary of Contents for SX-1






















































































































































































































Search results

Summary of Contents for SX-1

Reviews:

Related manuals for SX-1

Brands by name

Popular brands

Tascam SX-1, Reference Manual

Search results

Summary of Contents for SX-1

Reviews:

Related manuals for SX-1

Brands by name

Popular brands