Part VI–Audio tracks
130
TASCAM SX-1
Reference Manual
MERGE
This key is for MIDI editing only. Use
MERGE
to combine two different MIDI regions (the
contents of the clipboard and a region equal to the
length of the clipboard’s selection after the paste In
point).
RIPPLE/REV RIPPLE
Ripple is a mode where data
is moved during an edit operation, either to fill the
gap created by a Clear or Cut, or to move out of the
way for a Paste command. Ripple moves events later
in time, while Reverse Ripple moves events earlier in
time.
Use the
RIPPLE/ REV RIPPLE
key to enable rippling
for the Cut, Paste, Split, and Clear edit commands.
Press this key and its LED will light to indicate that
all subsequent edits will be rippled. For example,
with Ripple enabled, all material pasted from the
clipboard will be inserted at the In point and the orig-
inal material after the In point will move later in
time. Pressing
SHIFT
+
RIPPLE/REV RIPPLE
moves
the rippled data to the left.
UNDO
Use the
UNDO
key to revert to the project’s
state just before your last edit or record move.
REDO
Use the
REDO
key to revert the last Undo
move.
TIP
In the VGA, click on the
History
tab to view all of the ses-
sion’s previous recording and editing moves.
SELECT
Press this key to jump to the
HyperSelect
LCD screen (pictured here). This screen mirrors the
controls of the
Waveform
tab’s
HyperSelect
command
(explained in “HyperSelect” on page 160), an item of
the
Edit Operation
menu. Use these controls to select
multiple audio events that conform to HyperSelect’s
Selected Region
Region 1
Region 2
In
Out
Audio After Merge
In
Out
Merged Region
Audio Before Paste Ripple
Audio After Paste Ripple
In
Pasted From Clipboard
Clipboard
Audio Before Reverse Paste Ripple
Audio After Reverse Paste Ripple
In
Clipboard
Pasted From Clipboard
