manualshive.com logo in svg

Tascam SX-1, Reference Manual

Share
Download
Tascam SX-1 Reference Manual Download Page 107

Part V–Effects

 TASCAM SX-1 

Reference Manual

 107

Routing Effects Screens

The effects routing displays let you select, configure, 
and route the effects plugins.

VGA EFFECTS SLOT/ROUTING Module

This module is part of the 

Effects

 screen. It houses the 

controls for assigning the effects algorithms to the 
processor slots, and routing the audio inputs and 
outputs

.

Effect Slot 

Selects the placement of the effect 

algorithm in the DSP chain. The selections are:

Internal FX 1-4 

The four available native DSP 

quadrants.

Current Effect 

Selects an effect algorithm.

Input Routing 

Click on the arrow for the 

Left In

 and 

Right In

 fields to select the input source for the effect 

displayed in the 

Current Effect

 field.

Output Routing 

Click on the arrow for the 

Left Out

 

and 

Right Out

 fields to select the output destination for 

the effect displayed in the 

Current Effect

 field.

LCD Effects Routing Screen

The LCD 

Effects

 screens mirror the VGA 

Effects

 

screen.

EFFECTS 

The 

EFFECTS

 screen’s 

ROUTING

 page houses 

controls for assigning the effect algorithms to a DSP 
quadrant, the effect algorithm’s input source, and 
output destination.
From the 

MAIN DISPLAY MODES

 

section, press 

EFFECTS

. 

The 

ROUTING CURSOR

 soft knob can be used to select 

the routing node, and 

SELECT ROUTING

 is used to bring 

up all possible destinations for the routing.

PREV SLOT 

Skips back to select the previous effects 

slot.

NEXT SLOT 

Skips forward to select the next 

effects slot.

ROUTING 

This screen’s default page.

CLEAR SLOT 

Removes the effect algorithm from the 

currently selected slot.

Summary of Contents for SX-1






















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands