background image

Part II–Monitoring Signals and Selecting Screens

 TASCAM SX-1 

Reference Manual

 27

Chapter 5 – Selecting Screens

Screen Controls

You have a choice of using the onboard LCD or a 
connected VGA display as your main screen.

Main Display Key

The 

MAIN DISPLAY

 key selects between the SX-1’s 

onboard LCD screen or an external VGA monitor as 
your main display. The LCD always follows the 
selection keys in the 

MAIN DISPLAY MODES

 

sec-

tion.
To have an external VGA follow these keys, press 

MAIN DISPLAY

 and make the associated 

<EXTERNAL>

 LED light. The LED indicator set-

tings are as follows:

<INTERNAL>

 

When the 

<INTERNAL>

 LED is illu-

minated, the screens recalled by the keys in the 

MAIN 

DISPLAY MODES

 

section appear on the LCD . If an 

VGA screen is connected, its display will not follow 
the 

MAIN DISPLAY MODE

 

keys.

<EXTERNAL>

 When the 

<EXTERNAL>

 LED is on, 

the screens recalled by the 

MAIN DISPLAY MODES

 

keys appear on both the LCD and the external VGA 
display at the same time.

TIP

VGA screens can also be changed, independently of the 
LCD, by pressing ALT and a number key on a connected 
PS/2 keyboard.

This option is available regardless of the 

MAIN 

DISPLAY

 key’s setting.

The LCD also has its own set of dedicated controls in the 

LCD ACCESS

 section.

Main Display Mode Section

The controls in this section recall different screens. 
These screens appear on both the LCD and a con-
nected VGA display (when the 

MAIN DISPLAY

 key 

is set to 

EXTERNAL

).

TRACK 

The 

TRACK

 key recalls the 

TRACK

 screen, 

where tracks are created and edited.

MIXER 

The 

MIXER

 key recalls the 

MIXER

 screen, 

which shows a full console view on the VGA, along 
with a channel-at-once view on the LCD.

CHANNEL 

The 

CHANNEL

 key recalls the 

MIXER 

CHANNEL

 screen, which shows all of the parameters 

for a selected channel.

Summary of Contents for SX-1






















































































































































































































Reviews: