Part IV–Mixer Controls
104
TASCAM SX-1
Reference Manual
Disabling AUTO REVERT
when TRIM is
enabled, this allows you to manually stop trimming
mix moves by stopping play or by pressing the
REVERT/ AUTO FADE
key. In this situation, all con-
trols that are trimming mix moves will stop trimming
simultaneously when
REVERT/ AUTO FADE
is
pressed or playback stops.
Below is an example of trimming fader moves with
Auto Revert disabled:
Automating Library Recall
The SX-1 automation system is capable of including
library recall events as part of an automated mix.
These are treated by the automation system as Switch
Events. All SX-1 libraries support automated recall
for: Scene, EQ, Compression, Expanders, Gates, and
the plug-in effects.
Because there may be differences between control
settings recalled by a library and those being played
back by the automation system, below are some
important things to keep in mind in order to avoid
unexpected behavior.
The basic rule is that automation data, whether a
library recall or a dynamic mix move, only has prior-
ity until another mix event is played back.
Writing Library Recall Events Over Existing Static Control Positions
When a library recall event is written by the automa-
tion system which affects controls in Static, those
controls become Dynamic. This ensures correct con-
trol position when locating the transport to a position
prior to the first library recall event. This also means
that if those controls need to be adjusted, INIT EDIT
or Global Write must be used. If a dynamic move is
written after a library recall, the control will Revert
to the setting determined by the control’s Initial Sta-
tus, which may differ from the library recall immedi-
ately preceding the dynamic move.
If a library is recalled which affects controls in Static
mode without the library recall event being written,
the controls will update their static positions as if
they had been directly adjusted.
8 sec
8 sec
+12
+6
+3
0
-3
-6
-12
+12
+6
+3
0
-3
-6
-12
1 sec
2 sec
3 sec
4 sec
5 sec
6 sec
7 sec
1 sec
2 sec
3 sec
4 sec
5 sec
6 sec
7 sec
-9
Existing Fader Move
Mix Move
Touch Fader
Release Fader
Press REVERT
Fader
Movement
Revert
Time
