Part IV–Mixer Controls
48
TASCAM SX-1
Reference Manual
CUE
Press this key to assign the selected channel to
the Cue buss.
L/R
Press this key to send the selected channel to the
master stereo buss out.
LINK
The
LINK
key allows the selected channel to be
ganged with an adjacent channel (the next even chan-
nel if the selected channel is odd, and the previous
odd channel if the selected channel is even) for stereo
operation. Right-click on the key and select which
functions are linked (aux send, dynamics, EQ, faders,
trim/delay, stereo pan, and cue pan).
FX INSERT
Use this key to enable or disable one of
the SX-1’s eight inserts. Right-click on the key’s
arrow to select or configure an insert source.
Main
This onscreen fader mirrors the selected chan-
nel’s physical fader.
Cue
This onscreen fader mirrors the selected chan-
nel’s physical fader for its cue level.
TIP
Exact numerical values can be entered directly into the
text field above the
Main
and
Cue
faders. Click once in
the field to highlight the text, then enter a value using
the PS/2 keyboard’s number keys and press “enter” to
set the value.
POSITION
The
POSITION
module determines the
channel’s position in the stereo (or surround) field.
Phase
This button reverses the selected channel’s
phase by 180º.
Trim dB
Use this fader to trim the selected channel’s
audio ±20dB.
Delay Samples
Use this fader to delay the selected
channel’s audio by a set number of samples (up to
8191 samples).
Pan
This fader mirrors the selected channel’s physi-
cal pan pot.
Cue Pan
This fader mirrors the selected channel’s
Cue mix pan pot.
GROUPS
The
GROUPS
module gives you direct
access to the selected channel’s associated fader
groups.
Master
This window displays the master fader asso-
ciated with the selected channel.
Add
Press the
key (under either the
Master
or the
Slaves
windows) to add a fader to its associated group.
DISSOLVE
Dissolves the group when the Master
channel is selected.
Slaves
This window displays the slave faders associ-
ated with the selected channel and its Master fader.
AUX SEND
The
AUX SEND
module houses controls
for all six of the channel’s aux sends.
Keys 1 to 6
These keys enable or disable, the
selected channel’s aux sends.
PRE/POST
The
PRE/POST
keys select whether their
associated aux sends will operate before (pre) or after
(post) the selected mixer channel’s fader level.
Faders
These faders mirror the Virtual Channel’s
Aux Send pots and the
Mixer
screen’s Aux faders.
