Tandberg Data MSERIES RMC USER, User Manual

Page: 79 / 98

Tandberg Data M-Series Remote Management Card User’s Guide 65
2005 Hardware Failure Drive timeout waiting for status (drive 5 in this frame)
2006 Hardware Failure Drive timeout waiting for status (drive 6 in this frame)
2009 Hardware Failure Requires newer version of system board
2012 Hardware Failure Invalid byte received from drive 1 in this frame
2013 Hardware Failure Invalid byte received from drive 2 in this frame
2014 Hardware Failure Invalid byte received from drive 3 in this frame
2015 Hardware Failure Invalid byte received from drive 4 in this frame
2016 Hardware Failure Invalid byte received from drive 5 in this frame
2017 Hardware Failure Invalid byte received from drive 6 in this frame
201A Soft Error Invalid packet received from drive 1 in this frame
201B Soft Error Invalid packet received from drive 2 in this frame
201C Soft Error Invalid packet received from drive 3 in this frame
201D Soft Error Invalid packet received from drive 4 in this frame
201E Soft Error Invalid packet received from drive 5 in this frame
201F Soft Error Invalid packet received from drive 6 in this frame
2023 Hardware Failure Could not get a semaphore from OS
2024 Hardware Failure Response packet received from drive 1 in this frame indicates
command failed
2025 Hardware Failure Response packet received from drive 2 in this frame indicates
command failed
2026 Hardware Failure Response packet received from drive 3 in this frame indicates
command failed
2027 Hardware Failure Response packet received from drive 4 in this frame indicates
command failed
2028 Hardware Failure Response packet received from drive 5 in this frame indicates
command failed
2029 Hardware Failure Response packet received from drive 6 in this frame indicates
command failed
2100 Hardware Failure I2C interface failed to initialize
2101 Hardware Failure Timed out waiting for I2C bus to go not busy
2102 Hardware Failure No acknowledge received from slave
2103 Hardware Failure Exceeded retry limit while trying to send message
2105 Hardware Failure Message received from I2C bus but destination is unknown
2106 Hardware Failure Message to send over I2C bus is too large (see path)
2107 Hardware Failure Message received over I2C bus is too large
FSC Code
E-mail Message Error
Type Description