Tandberg Data MSERIES RMC USER, User Manual

Page: 29 / 98

Chapter 1 RMC Server Management
Utilities
Tandberg Data M-Series Remote Management Card User’s Guide 15
Rebooting the
RMC and Library
1
To utilize updated configuration information, the RMC and library
must be rebooted. To reboot the RMC and library:
1
Access the
Utilities
page. For more information, see Utilities .
2
Under
Shutdown Remote Management Card,
select
Reboot
and
press
OK
. The RMC system reboots itself, including restarting
and initializing the library. In a multiple frame environment,
all libraries will be restarted and initialized.
Shutting Down the
RMC
1
Shutting down a M1500/M2500 library while the RMC is in
operation may cause the RMC image and/or configuration file to
be corrupted. To prevent this from happening, follow this
procedure whenever you must shutdown a library with a RMC
installed.
Note:
Rebooting the RMC and library may take up to 15
minutes during which time the library is unavailable.
Before rebooting the RMC and library, be certain
there are no active or pending jobs being processed
by the library. It should not be necessary to reboot the
RMC and library during normal operation.