Chapter 1 RMC Server Management
Network Configuration
Tandberg Data M-Series Remote Management Card User’s Guide
7
Viewing or Editing
Network
Configuration
1
To view or change the basic configuration of the RMC:
1
In the navigation frame, under
RMC Server Management
, press
Network Configuration
. The management frame displays the
Network Configuration
page as shown in
figure 2
.
Figure 2 Network
Configuration
2
Edit the configuration information as required. See
table 2
for a
description of the fields.
3
Press
Apply
. The RMC will not use the new basic configuration
until it is rebooted. For more information, see
Rebooting the
RMC and Library
on page 15.
Note:
If the Internet browser displays a dialog box
prompting you for your user name and password,
type the information in the dialog box, and press
OK
.
Summary of Contents for MSERIES RMC USER
