Tandberg Data MSERIES RMC USER, User Manual

Page: 67 / 98

Tandberg Data M-Series Remote Management Card User’s Guide 53
Appendix A
Event Details Listing
Remote ALERT SNMP is managed through the SNMP traps. For
information on setting up ALERT SNMP, refer to ALERT SNMP
Configuration on page 17. ALERT SNMP is accessible using Internet
browser software installed on the host computer. This configuration
allows you to set up information about SNMP and select categories
containing predefined traps. The predefined traps are listed in this
appendix by their reporting level.
Enable the trap types to be reported:
Informational
,
Warning
,
Failure
,
Available
, or
Unavailable
. The
Details
button on the ALERT SNMP
Configuration page also provides the supported traps for the
Informational
,
Warning
, and
Failure
trap types.
Table 9 Information
Events Detail
FSC Code
E-mail Message Error
Type Description
2403 No mail generated Source is empty
2404 No mail generated Destination is full
2405 No mail generated Element address supplied is invalid
2408 No mail generated Destination slot not present. Magazine or drive removed.