Tandberg Data MSERIES RMC USER, User Manual

Page: 77 / 98

Tandberg Data M-Series Remote Management Card User’s Guide 63
Table 11 Failure
Events Detail
Tape Alert
Flag
E-mail Message Error
Type Description
1 Soft Error The drive is having severe trouble reading the media
2 Soft Error The drive is having severe trouble writing to the media
3 Hardware Failure The drive had a hard read or write error
7 Soft Error The media has exceeded its specified life
8 Soft Error The drive has not been able to read the MRS stripes
15 Soft Error Memory chip failed in cartridge
16 Soft Error Manual or forced eject while drive actively writing or reading
18 Soft Error Directory data stored on tape has been corrupted
21 Soft Error The drive is ready for a periodic cleaning
23 Soft Error Invalid cleaning tape type used
29 Soft Error The drive requires preventive maintenance other than cleaning
32 Hardware Failure The drive has identified an interfacing fault
34 Soft Error Firmware download failed
35 Soft Error Drive humidity limits exceeded
36 Soft Error Drive temperature limits exceeded
37 Soft Error Drive voltage limits exceeded
38 Soft Error Predictive failure of drive hardware
39 Soft Error The drive may have a hardware fault that extended diagnostics may
help identify
42 Hardware Failure Library mechanism has a hardware fault
46 Soft Error Predictive failure of loader mechanism hardware
65 Soft Error Unknown tape alert flag
69 Soft Error Unknown tape alert flag
FSC Code
E-mail Message Error
Type Description
0001 Hardware Failure A divide by zero exception has occurred
0002 Hardware Failure A parity error has been detected on the address/data bus
0003 Hardware Failure Out of memory
0004 Soft Error _flsbuf was called