Tandberg Data MSERIES RMC USER, User Manual

Page: 76 / 98

62 Tandberg Data M-Series Remote Management Card User’s Guide
2613 Soft Error Requested action cannot be carried out without a cartridge in the
hand
261A Hardware Failure The hand action ‘completed’ with no cartridge detected in the
source
2624 Hardware Failure The (nvr spec’d) xy build does not provide access to the cleaner slot
2625 Hardware Failure The elevator vertical position is still unknown
2634 Hardware Failure The inserted magazine has not been pushed fully home
2636 Hardware Failure The elevator X axis offset is too great; likely build error
2637 Hardware Failure The elevator is set too far back on the hand axis; likely build error
263B Soft Error The cleaning tape in use has expired
263C Soft Error The autoclean cycle has loaded a noncleaning or invalid tape
263E Hardware Failure The cartridge is not fully in the elevator; manual intervention
required
263F Hardware Failure Manual intervention and power cycle are required
2640 Hardware Failure Detail is not known, but manual intervention and power cycle
required
2641 Hardware Failure The fixed slot check has detected a fixed slot
26B8 Soft Error Drive 1 in this frame has no cartridge to unload
26B9 Soft Error Drive 2 in this frame has no cartridge to unload
26BA Soft Error Drive 3 in this frame has no cartridge to unload
26BB Soft Error Drive 4 in this frame has no cartridge to unload
26BC Soft Error Drive 5 in this frame has no cartridge to unload
26BD Soft Error Drive 6 in this frame has no cartridge to unload
26D8 Hardware Failure Attempt to initialize Drive 1 in this frame before it has become
available
26D9 Hardware Failure Attempt to initialize Drive 2 in this frame before it has become
available
26DA Hardware Failure Attempt to initialize Drive 3 in this frame before it has become
available
26DB Hardware Failure Attempt to initialize Drive 4 in this frame before it has become
available
26DC Hardware Failure Attempt to initialize Drive 5 in this frame before it has become
available
26DD Hardware Failure Attempt to initialize Drive 6 in this frame before it has become
available
4200 Soft Error NVR CRC invalid and contents probably corrupt
FSC Code
E-mail Message Error
Type Description