Tandberg Data MSERIES RMC USER, User Manual

Page: 75 / 98

Tandberg Data M-Series Remote Management Card User’s Guide 61
2030 Hardware Failure Response packet received from drive 5 in this frame indicates
command failed
2031 Hardware Failure Response packet received from drive 6 in this frame indicates
command failed
2034 Hardware Failure Response received from drive 1 in this frame indicates drive busy
2035 Hardware Failure Response received from drive 2 in this frame indicates drive busy
2036 Hardware Failure Response received from drive 3 in this frame indicates drive busy
2037 Hardware Failure Response received from drive 4 in this frame indicates drive busy
2038 Hardware Failure Response received from drive 5 in this frame indicates drive busy
2039 Hardware Failure Response received from drive 6 in this frame indicates drive busy
2104 Hardware Failure Expected response from hardware was not received
2303 Hardware Failure Barcode reader did not find a barcode
2409 Hardware Failure Magazine removed when door was shut
240A Hardware Failure Magazine inserted without proper access
240B Soft Error Demo stopped; no slot available for cartridge destination
240C Soft Error Sequence stopped; no cartridge available to perform requested
action
240D Soft Error Librarian uncertain of cartridge origin
240E Hardware Failure Manual intervention required to remove cartridge from the elevator
240F Hardware Failure The requested move cannot be performed
2410 Hardware Failure The requested move cannot be performed
2411 Hardware Failure Autoclean cannot be performed as there are no cleaning tapes
2412 Hardware Failure Autoclean cannot be performed as all the cleaning tapes are in use
2414 Soft Error Demo unable to select random start slot. Try rerunning demo.
2417 Soft Error Fixed slot reserved for dedicated cleaner; not for general use
2419 Soft Error Illegal magazine configuration. Recheck.
241A Soft Error Stack contains modules configured for different media to stack-
master
241B Soft Error Fixed slot detected when library configured for 6 drive operation
241C Soft Error No fixed slot detected when library configured for 5 drive operation
241D Soft Error Magazine 5 detected when library configured for 6 drive operation
241E Soft Error Drive 3 in this frame detected when library configured for 5 drive
operation
2504 Soft Error Bad page code in send diagnostic
2612 Soft Error Requested action cannot be carried out with a cartridge in the hand
FSC Code
E-mail Message Error
Type Description