Standalone DVR – Jupiter Series
85
Alarm
Please note before setting the alarm, you need to properly connect the devices of alarm
input and output, the address of sending and receiving messages. Click “Save” button
confirm current setup. Alarm setup includes the following items. See Figure 6-36.
Event Type: you can select the event type from the drop down list.
Alarm in: Select corresponding alarm in channels.
Type: There are two options: normal open and normal close.
Record channel: select record channel when alarm occurs. Please note you need to
select alarm record in DVR schedule interface and enable schedule
function in manual record interface.
Alarm output: select alarm activation channel when alarm occurs. Please note
channel 3 is to c12V output.
Show message: System can pop up a message to alarm you on the local host
screen if you enabled this function.
Email: System can send out email to alert you when alarm occurs.
PTZ activation: Here you can set PTZ movement when alarm occurs. Such as go to
preset x when there is an alarm. Click set button, the interface is
shown as in Figure 6-37.
Tour: Here you can enable tour function when alarm occurs. System supports
multiple-window tour. Please refers to chapter 5.3.9 Display.
Figure 6-36
Figure 6-37
Summary of Contents for Jupiter 30450711S
Page 15: ...Standalone DVR Jupiter Series 15 2 6 Application Diagram...
Page 29: ...Standalone DVR Jupiter Series 29 Figure 4 16 Figure 4 17 Figure 4 18...
Page 33: ...Standalone DVR Jupiter Series 33 Figure 4 21 Figure 4 22 Figure 4 23 Figure 4 24...
Page 87: ...Standalone DVR Jupiter Series 87 Figure 6 39 Figure 6 40 Figure 6 41 Figure 6 42...