Talitor Jupiter 30450711S, User Manual

Page: 30 / 111

Standalone DVR – Jupiter Series
30
4.5.3 Video Loss
In Figure 4-14, select video loss from the type list. You can see the interface is shown as in
Figure 4-19.This function allows you to be informed when video loss phenomenon occurred.
You can enable alarm output channel and then enable show message function.

Channel: select the channel you want to enable lens shading alarm.

Event type: please select video loss.

Channel: select the channel to record when video loss occurred.

Alarm output: activate peripheral alarm device when video loss occurred.

Latch: when motion detection complete, system auto delays detecting for a specified
time. The value ranges from 10-300 (Unit: second)

Show message: System can pop up a message to alarm you in the local host screen if
this function is enabled.

Send email: System can send out email to alert you when alarm occurs.

PTZ activation: Here you can set PTZ movement when alarm occurs. Such as go to
preset, tour & pattern when there is an alarm. Click “Select” button,
you can see an interface is shown as in Figure 4-16.

Period: Click “Set” button, you can see an interface is shown as in Figure 4-17. Here you
can set for business day and non-business day. In Figure 4-17, click “Set”
button, you can see an interface is shown as in Figure 4-18. Here you can set
your own setup for business day and non-business day.

Sensitivity: there are six levels. The sixth level has the highest sensitivity.

Alarm output: when alarm occurred, system enables peripheral alarm devices.

Tour: Here you can enable tour function when alarm occurs. It is a single window tour.
Please go to chapter 5.3.9 Display for tour interval setup.

Snapshot: System can snapshoot when alarm occurs.
Figure 4-19