Standalone DVR – Jupiter Series
46
5.3.4 RS232
RS232 interface is shown as below. Here are five items. See Figure 5-9.
Function: There are various devices for you to select. Console is for serial port or
min-end platform to upgrade program. Keyboard is for you to use special
keyboard to control current device.
Baud rate: You can select proper baud rate.
Data bit: You can select proper data bit.
Stop bit: There are three values: 1 / 1.5 / 2.
Parity: there are three choices: none / odd / even.
After completing all the setups, please click save button, system goes to the previous menu.
Figure 5-9
5.3.5 Network
Here is for you to input network information. See Figure 5-10.
IP address: Here you can input IP address.
DHCP: It is auto search IP function. When enable DHCP function, you can not modify
IP Address / Subnet Mask / Gateway. These values are from DHCP function.
If you have enabled DHCP function, IP Address / Subnet Mask / Gateway display
as 0. You need to disable DHCP function to view current IP information.
When
PPPoE
is operating, you can not modify IP Address/Subnet Mask/Gateway.
TCP port: Default value is 37777.
UDP port: Default value is 37778.
HTTP port: Default value is 80.
Max connection: system supports maximal 10 users. 0 means no connection limit.
Transfer mode: Here you can select the priority between fluency / video qualities.
Network download: System can process the downloaded data first if you enable this
function.
Summary of Contents for Jupiter 30450711S
Page 15: ...Standalone DVR Jupiter Series 15 2 6 Application Diagram...
Page 29: ...Standalone DVR Jupiter Series 29 Figure 4 16 Figure 4 17 Figure 4 18...
Page 33: ...Standalone DVR Jupiter Series 33 Figure 4 21 Figure 4 22 Figure 4 23 Figure 4 24...
Page 87: ...Standalone DVR Jupiter Series 87 Figure 6 39 Figure 6 40 Figure 6 41 Figure 6 42...
