Standalone DVR – Jupiter Series
56
After all the setups are completed, please click “OK” button, system needs to reboot to get
all the activated modification.
Figure 5-29
Click “Alarm Set” button, the interface is shown as below. See Figure 5-30 (This interface is
just like the abnormity setup).
Please highlight icon “
” to select the corresponding function.
You can enable one or more alarm setups. The lower limit ranges from 1% to 99%.
Alarm channel number ranges from 1 to 6. Delay value is from 0 to 240 seconds.
Please note when HDD capacity is not full, system only alarms once!
After completing all the setups, please click “OK” button, system goes to the previous menu.
Figure 5-30
5.5.2 Abnormity
Abnormity interface is shown as below. See Figure 5-31.
Event type: There are several options for you such as disk error, no disk and etc.
Alarm output: alarm activation output port, among which is controllable 12V output.
Summary of Contents for Jupiter 30450711S
Page 15: ...Standalone DVR Jupiter Series 15 2 6 Application Diagram...
Page 29: ...Standalone DVR Jupiter Series 29 Figure 4 16 Figure 4 17 Figure 4 18...
Page 33: ...Standalone DVR Jupiter Series 33 Figure 4 21 Figure 4 22 Figure 4 23 Figure 4 24...
Page 87: ...Standalone DVR Jupiter Series 87 Figure 6 39 Figure 6 40 Figure 6 41 Figure 6 42...
