Talitor Jupiter 30450711S, User Manual

Page: 31 / 111

Standalone DVR – Jupiter Series
31
4.5.4 Camera Masking
When someone viciously masks lens, the system can alert you to guarantee video continuity.
Camera masking interface is shown as in Figure 4-20.

Channel: select the channel you want to enable camera mask detection function.

Event type: please select camera mask detect from the dropdown list.

Channel: select the channel to record when camera mask occurred.

Alarm output: activate peripheral alarm device when camera mask occurred.

Enable tour: Here is for you to activate tour between different cameras.

Latch: when motion detection complete, system auto delays detecting for a specified
time. The value ranges from 10-300 (Unit: second)

Show message: System can pop up a message to alarm you in the local host screen if
you enabled this function.

Send email: System can send out email to alert you when alarm occurs.

PTZ activation: Here you can set PTZ movement when alarm occurs. Such as go to
preset, tour & pattern when there is an alarm. Click “select” button,
you can see an interface is shown as in Figure 4-16.

Period: Click “Set” button, you can see an interface is shown as in Figure 4-17. Here you
can set for business day and non-business day. In Figure 4-17, click “Set”
button, you can see an interface is shown as in Figure 4-18. Here you can set
your own setup for business day and non-business day.

Sensitivity: there are six levels. The six-level has the highest sensitivity.

Alarm output: when alarm occurred, system enables peripheral alarm devices.

Tour: Here you can enable tour function when alarm occurs. It is a single window tour.
Please go to chapter 5.3.9 Display for tour interval setup.

Snapshoot: System can snapshoot when alarm occurs.
Note:
In this interface, copy/paste function is only valid for the same type, which means you can
not copy a channel setup in video loss mode to camera masking mode.
Figure 4-20