Talitor Jupiter 30450711S, User Manual

Page: 26 / 111

Standalone DVR – Jupiter Series
26
Please highlight icon “ ” to select the corresponding function. After all the setups, please
click “Save” button, system goes back to the previous menu.
At the bottom of the menu, there are color bars for your reference. Green stands for regular
recording, yellow stands for motion detection and red stands for alarm recording.
4.4.2.1 Quick Setup
This function allows you to copy one channel setup to another. After setting in channel 1,
you can click “Copy” button and turn to channel 2 and then click “Paste” button. You can
finish setting for one channel and then click “Save” button or you can finish all setup and
then click “Save” button to memorize all the settings.
4.4.2.2 Redundancy
Redundancy function allows you to memorize record file in several disks. These files are
created, packaged and closed simultaneously. When there is file damage occurred in one
disk, there is a spare one in the other disk. You can use this function to maintain data
reliability and safety.
In the main menu, from Setting to Schedule, you can highlight redundancy button to enable
this function. See Figure 4-12.
In the main menu, from Advanced to HDD management, you can set one or more disk(s) as
redundant. You can select from the dropdown list. See Figure 4-13. System auto overwrites
old files once hard disk is full.
Please note only read/write disk or read-only disk can backup file and support file search
function, so you need to set at least one read-write disk otherwise you can not record video.
Note: about redundancy setup

If current channel is not recording, current setup gets activated when the channel begin
recording the next time.

If current channel is recording now, current setup will get activated right away, the
current file will be packet and form a file, then system begins recording as you have set.
After all the setups please click “Save” button, system goes back to the previous menu.
Figure 4-13