Talitor Jupiter 30450711S, User Manual

Page: 53 / 111

Standalone DVR – Jupiter Series
53
5.3.6 Alarm
Please refer to chapter 4.6 Alarm Setup and Alarm Activation.
5.3.7 Detect
Please refer to chapter 4.5 Detect.
5.3.8 Pan/Tilt/Zoom
Please refer to chapter 4.8.2 PTZ setup.
5.3.9 Display
The display setup interface is shown as below. See Figure 5-24.

Transparency: You can adjust transparency value. The value ranges from 128 to 255.

Channel name: You can modify channel name. Please note all your modification here
only applies to DVR local end. You need to open web or client end to
refresh channel name.

Time display: You can choice to display time or not when system is in live view mode.

Channel display: You can choice to display channel name or not when system is in live
view mode.

Overlay info: System displays some information on the screen for your reference.

Display mode: you can select from the dropdown list-> self-adaptive / VGA / TV.

Enable tour: activate tour function.

Interval: Input proper interval value here. The value ranges from 5 to 200 seconds.
In tour process, you can right click mouse to turn on window switch function.
“ ” stands for opening switch function, “ ” stands for closing switch
function.

Motion tour type: System support 1 / 8 window tour.

Alarm tour type: System support 1 / 8 window tour.
Please highlight icon “ ” to select the corresponding function.
After completing all the setups, please click save button, system goes to the previous menu.
Figure 5-24