Talitor Jupiter 30450711S, User Manual

Page: 17 / 111

Standalone DVR – Jupiter Series
17
3.2.3 Alarm recording

Connect the alarm input to the DVR.

Set the related settings in the menu to start alarm recording. See details at “MAIN MENU”
-> “SETTING” -> “ALARM” .
3.2.4 Motion detection recording

Record the channel only in need of motion detection first confirm whether this channel is on
schedule recording.

Set the related settings in the menu to start motion detection recording. See details at
“MAIN MENU” -> “SETTING” -> “DETECT” .
3.3 Alarm connection operation

Connect the alarm input to the DVR.

Connect the related alarm output according to the necessity (Example: light, beeper, etc…).

Set the related settings in the menu. See details at
“MAIN MENU”
->
“SETTING”
->
“ALARM” .
3.4 Pan/Tilt/Zoom control operation

Confirm the right connection of RS485 A,B line of P/T/Z device and the RS485 A,B line of DVR.

Set the related settings in the menu. See details at “MAIN MENU” -> “SETTING” ->
“PAN/TILT/ZOOM” .

To shift the monitor image to the single window monitor of the channel is in need of P/T/Z
control.

Then press “Fn” on the remote controller or on the front panel to shift the items on the screen.

Use direction keys or USB mouse to move and control the selections on the screen.
3.5 Network connection operation

Confirm the correct network connection between DVR and computer.

Set the IP address, subnet mask and gateway of the computer and DVR separately. ( if there is
no router among the network, only set the IP address; if there is routers in the network, please
set the related gateway and subnet mask.)

Use ping ***.***.***.*** (IP address of DVR) to check the link of the network, replied TTL
values less the 64 is normal

Open IE Browser and input the IP address of the DVR you want to log in.

Upon network operation, please see details at Chapter 5 about operation through network.