Standalone DVR – Jupiter Series
81
Tip:
After you finished setup for one channel, you can click “Save as” button, system pops
up the following interface. See Figure 6-29. Then you can copy one channel setup to others.
Figure 6-29
Network
Network interface is shown as in Figure 6-30.
This interface includes the following items:
Max: Here you can set max connection amount. The value ranges from 0 to 10.
0 means no network connection is allowed.
TCP port: default setup is 37777. (Port 37778 is for network UDP port use only)
HTTP port: default setup is 80.
Transfer: here you can select the priority between fluency/video quality.
Enable PPPoE
In remote item, enable “PPPoE” function and then input “PPPoE User Name” and
“PPPoE Password” you get from your ISP (Internet service provider). See Figure 6-30.
Click “Save” button and then restart DVR to activate your configuration. After rebooting
, DVR will connect to internet automatically. The IP displayed in the “IP address” column
is the dynamic value. You can use client software to visit current IP now.
Figure 6-30
Summary of Contents for Jupiter 30450711S
Page 15: ...Standalone DVR Jupiter Series 15 2 6 Application Diagram...
Page 29: ...Standalone DVR Jupiter Series 29 Figure 4 16 Figure 4 17 Figure 4 18...
Page 33: ...Standalone DVR Jupiter Series 33 Figure 4 21 Figure 4 22 Figure 4 23 Figure 4 24...
Page 87: ...Standalone DVR Jupiter Series 87 Figure 6 39 Figure 6 40 Figure 6 41 Figure 6 42...
