Standalone DVR – Jupiter Series
48
5.3.5.3 Multiple Cast Setup
Multiple-cast setup interface is shown as in Figure 5-13.
Figure 5-13
Here you can set a multiple cast group. Please refer to the following sheet for detailed
information.
IP multiple cast group address
- 224.0.0.0 ~ 239.255.255.255
- “D” address space
- The higher four-bit of the first byte=”1110”
Reserved local multiple cast group address
- 224.0.0.0-224.0.0.255
- TTL=1 When sending out telegraph
- For example
224.0.0.1
All systems in the sub-net
224.0.0.2
All routers in the sub-net
224.0.0.4
DVMRP router
224.0.0.5
OSPF router
224.0.0.13 PIMv2 router
Administrative scoped addressees
- 239.0.0.0 ~ 239.255.255.255
- Private address space
Like the single broadcast address of RFC1918
Can not be used in Internet transmission
Used for multiple cast broadcast in limited space.
Except the above mentioned addresses of special meaning, you can use other addresses.
For example:
Multiple cast IP: 235.8.8.36
Multiple cast PORT: 36666.
5.3.5.4 PPPoE
PPPoE interface is shown as in Figure 5-14.
Input “User Name” and “Password” you get from your ISP (Internet service provider).
Click “OK” button, you need to restart system to activate your configuration.
After rebooting, system will connect to internet automatically. The IP Address in the PPPoE
interface is the DVR dynamic IP value. You can access this IP address to visit the unit.
Summary of Contents for Jupiter 30450711S
Page 15: ...Standalone DVR Jupiter Series 15 2 6 Application Diagram...
Page 29: ...Standalone DVR Jupiter Series 29 Figure 4 16 Figure 4 17 Figure 4 18...
Page 33: ...Standalone DVR Jupiter Series 33 Figure 4 21 Figure 4 22 Figure 4 23 Figure 4 24...
Page 87: ...Standalone DVR Jupiter Series 87 Figure 6 39 Figure 6 40 Figure 6 41 Figure 6 42...
