Tadiran Telecom Aeonix T200M Series, User Manual

Page: 250 / 316

Attendant Features 236 T200M Series User Guide (Coral IPx / FlexiCom)
Station Setup Features
boss group, keyset voice page, zone group page, page public address, UNA/central bell, outside trunk call,
public and private speed dial, pre-recorded DVMS message, group call, and network number
.
NOTE! Hot Station Delay is not applicable for SIP telephones, such as: T300 Series, T40 Series .

[HotI]
Hot Station Immediate is used to program a telephone to immediately ring another station, automatically
connect to a paging device, or automatically dial out immediately when the handset is taken off-hook, or
SPKR
is pressed (or upon dialing from T300 Series, T40 series telephones) . Possible destinations are
operator, station, hunt group, boss group, keyset voice page, zone group page, page public address, UNA/
central bell, outside trunk call, public and private speed dial, pre-recorded DVMS message, group call, and
network number
.

[OrgO]
Originating Only is used to prohibit incoming calls from arriving at a station. In this case the user can only
make outgoing calls, but is unable to receive calls. A caller to this station will hear the reorder tone.

[noTK]
Outgoing Call Restriction is used to prevent a station from making outgoing trunk calls.

[Blck]
Station Blocking is used to temporarily prevent a station from both making and receiving calls. A caller to
this station will hear the reorder tone.

[TrmO]
Terminating Only is used to prohibit a station from originating any telephone calls (internal or external).
When defined as Terminating Only, the user can receive calls, but is unable to make calls.