Tadiran Telecom Aeonix T200M Series, User Manual

Page: 72 / 316

Operating the Phone 58 T200M Series User Guide (Coral IPx / FlexiCom)
During Idle
numbers, selecting this will block the number, and vice versa. See
Caller ID Control on page 88
.
[Wake]
Wake Up is used to set, review, or cancel wakeup calls which will ring your phone at a designated time.
Voice Paging on page 214
[aWk]
Attendant WakeUp is relevant for Attendant Console only. Press
[aWk]
to access the attendant wakeup
options. See
WakeUp on page 231
.
[CIns]
Conference Inspect allows you to release a conference participant from an ongoing conference. You may
also view the participant list. See
Conference Calls: Conference View/Release on page 99
.
[GpCl]
Group Calls is used to activate Group Call Conference features. See Group Calls on page 124 .
[ACD]
ACD/UCD Options is used to activate ACD/UCD features for Call Center or Hunt group agents. See
ACD and UCD Hunt Groups on page 66
.
[Lock]
Phone Lock is used to prevent unauthorized persons from using your phone line. Incoming calls may still be
answered. See Phone Lock on page 174 .
[Exec]
Executive Privilege is used to copy all the COS features from any system station to your telephone, in order
to use features or to dial numbers restricted to the current station. See
Executive Privilege on page 117
.
[COS]
COS Switchover is used to change your Class of Service from Primary to Secondary or vice versa. Different
COS give different dial and feature capabilities to a particular station. See COS Switchover on page 100 .
[fSet]
Setup is used to program your station for specific feature activation. See
Setup on page 249
.
[Trc]
Malicious Call Trace is used to record the next x (a system-defined variable) calls to your phone. A list of
these calls can be sent to a printer or terminal. See
Individual Remote System Services (IRSS) - Freedom on
page 141 .
[aTrc]
Attendant Call Trace is relevant for Attendant Console only. Use Attendant Malicious Call Trace to set or
print a call trace for any station. See Malicious Call Trace on page 228 .
[Room]
Room Status (or Canned Messages) is used to toggle the room status definition (or canned message) of
your station on or off. See Room Status on page 194 or Canned Messages on page 94 .