Tadiran Telecom Aeonix T200M Series, User Manual

Page: 249 / 316

Attendant Features 235 T200M Series User Guide (Coral IPx / FlexiCom)
Station Setup Features
Station Setup Features
The Station Setup Features menu allows an attendant to define stations for specific feature activation. Some of these features
operate permanently, or until redefined. Other features operate on a one-time basis; after the feature is activated, it is then
cancelled and must be redefined or reactivated in order to operate again.
Press
[sSet]
to access the Station Setup Features.

[ChkO]
Check In/Check Out enables certain activities to be performed automatically (primarily used for rooms/
stations). These are: Room Block/Unblock, Charge Print, Canceling Existing Messages and Terminating
DND. Additionally, if defined system-wide, Wakeup and Call Forward are cancelled and Charge is reset. In
some systems (defined system-wide) this feature can be activated only on idle stations. If an attempt is made
to activate the feature on a busy station, the
BUSY
message is displayed.

[DND]
Do Not Disturb (DND) is used to activate Do Not Disturb for a station or Boss Group. A caller to this station
will hear a reorder tone, and only a station with DND override is able to call that station.

[HotD]
Hot Station Delay is used to program a telephone to ring another station, automatically connect to a paging
device, or automatically dial out when the handset is taken off-hook, or SPKR is pressed, and no digits
are dialed within the programmed first digit time-out . Possible destinations are operator, station, hunt group,
Page 1
10:50 26 May 2007 Company xyz
user name station number


aFwd Chrg
[sSet]
tSet
Page 2
Station Feat Setup

ChkO DND HotD HotI