Tadiran Telecom Aeonix T200M Series, User Manual

Page: 178 / 316

Station Telephony Features 164 T200M Series User Guide (Coral IPx / FlexiCom)
Page Queue
Page Queue
Page Queue allows you to park a call (up to ten calls can be multi-parked simultaneously) on designated Page_Q numbers by
sending the call to one of ten Page Queue destinations. Once parked, the call can be either retrieved at another station or you
can page someone else to pick up the call at any station or group of stations. You can page any system member from your
phone and announce that there is a call for Mr. Doe on Page Queue Line x. The call can be picked up from any system station
by dialing the Page Queue access code (default access codes are 7060-7069, see
Table on page 167
).
NOTE! To pick up the call, Mr. Doe should dial from any station to the relevant Page-Queue number
(default numbers
7060-7069, see Table on page 167 ). If the call is not picked up within a
predetermined time, it will automatically return to the originating station from which Page Queue
was placed.
The party placed on Page Queue may hear one of the following: music, recorded tone, busy tone or no sound at all, as defined
system-wide for each Page Queue.
To place a call in Page Queue:
1. While on a call, press
[PgQ]
to access the Page Queue options
,
2. Press a free
[PgQx]
( ten options see
Table on page 167
) to send the call to Page Queue number x .
Page 1 EXT ANS 2nd party

[Pg Q]
Xfer Hold Mute
Page 2 Page_Q Place/Pickup

PgQ1 PgQ2 PgQ3 PgQ4