Tadiran Telecom Aeonix T200M Series, User Manual

Page: 254 / 316

Attendant Features 240 T200M Series User Guide (Coral IPx / FlexiCom)
System Features
[ATT2]
Alternate Attendant Destination . This feature enables you to program an alternate attendant destination or
extension if the console is left unattended. After a time-out period, incoming calls to an unattended console
will be re-routed to the selected destination and the attendant console will go into
Unattended
mode
(see Do Not Disturb (DND) on page 108) . Any action that is performed at the original console will force it
back to Attended mode and the alternate destination back to normal operation.
Possible destinations are station, hunt group, boss group, UNA/ central bell, pre-recorded DVMS message,
public/private speed call, and group call .
Program an alternate destination in the following way:
1. Press
[ATT2]
.
2. Dial the destination number where calls are to be forwarded, OR
Choose
[Dest]
to change the destination, OR
Choose
[Canc]
to cancel the alternate destination.
3. Listen for the confirmation tone.
[XD/N]
Day/Night Transfer toggle feature. Press
[XD/N]
to switch from automatic to manual transfer between the
various Day/Night service modes and back again. When set to Auto Transfer, a bullet is displayed next to
[XD/N]
.
When set to Automatic, the system will transfer service modes without attendant supervision.
When set to Manual, the attendant must decide when to change modes using
[D/N1]
and
[D/N2]
(see below).
[D/N1]
Day/Night 1 toggles between Day (normal mode) and Night 1 service modes. When set to Night 1, a bullet is
displayed next to
[D/N1]
.
[D/N2]
Day/Night 2 toggles between Day (normal mode) and Night 2 service modes. When set to Night 2, a bullet is
displayed next to
[D/N2]
.
Use the table below to enter the relevant information concerning Day/Night Transfer. Contact your system
administrator for Day/Night Transfer times and destinations.