Tadiran Telecom Aeonix T200M Series, User Manual

Page: 197 / 316

Station Telephony Features 183 T200M Series User Guide (Coral IPx / FlexiCom)
Programming: Feature Keys
Programming Keys: Examples
Key
Contents
Key Description Procedure/Example
DSS
(Direct Station
Selection) Permits you to make or transfer a call to an
extension or trunk by using a defined key, and
provides a busy lamp indication for stations or
trunks programmed under a DSS key. To program a DSS key for extension 4577:
Press
[Prog]
, press the key you wish to program and
then the extension number 4577. To conclude, press
the key again.
Single feature Permits you to activate or cancel a single Coral
feature.
To program a key to turn the Do Not Disturb (DND)
feature on and off: Press
[Prog]
, press the key you wish
to program and then the feature code #145. To
conclude, press the key again.
Series of
features Permits you to program a series of features under
a single key; useful for one-button speed dialing,
voice response and voice mail system access, and
other complex dialing procedures. The
SPKR
code
#120 must be programmed between each
successive feature sequence.
To program a key to simultaneously turn off the DND
and transfer all calls to a library number programmed
for voice mail:
Press
[Prog]
, press the key you wish to program and
then the feature code #145. Dial twice, in succession,
SPKR code #120. Enter feature code #141 7000 (an
example of a library number). To conclude, press the
key again.
NOTE! In order for this to work properly, one of the two
features must be previously activated.
Feature key
without
confirmation
tone or display Permits you to activate or cancel a feature or
series of features without hearing a confirmation
tone or seeing a display. The
SPKR
code #120
must be programmed twice after each successive
feature sequence.
Follow the directions above and dial twice, in
succession, SPKR code #120 after library code 7000.