Attendant Features
243
T200M Series User Guide (Coral IPx / FlexiCom)
System Features
NOTE!
The number of digits that can be programmed, including dial codes, is limited by the Coral
(defined system-wide). If you try entering a longer digit string than allowed the system will give the
error message
LENGTH EXCEEDED
, and programming will stop.
[Time]
Time
is used to change the system time and date to reflect the time and date where the Coral system is
installed.
NOTE!
To set an offset time, see
.
Setting the time:
1. Press
[Time]
.
2. Dial the time, four digits (12 hour clock) use leading zeros, e.g. 0805 for 5 minutes after 8.
3. Choose
[AM]
or
[PM]
.
4. Choose
[Set]
.
5. Listen for the confirmation tone.
Setting the date:
1. Press
[Time]
.
2. Choose
[Date]
.
3. Dial the date, six-digit format: mm:dd:yy or dd:mm:yy (depending on your system setup). Use leading zeros.
For Example
: May 26, 2014 should be entered as
052614
in North America,
260514
in Europe.
4. Choose
[Set]
.
5. Listen for the confirmation tone.
Summary of Contents for Aeonix T200M Series
Page 1: ...Creating a new world of IPportunities T200M Series IP Telephone User Guide Version 16...
Page 2: ......
Page 14: ......
Page 315: ......
