T-Mobile Pocket PC, User Manual, Page: 188 / 258

188 Getting Connected
To enable auto selection of an available connection
If you have created more than one GPRS/EDGE connection, you can set your
device to connect to the best available connection automatically.
1.
Tap
Start > Settings > Connections
tab
> Connections
.
2.
Under T-Mobile Data, tap
Manage existing connections
.
3.
Select
Auto pick
, then tap
OK
.
11.5 Dial-up and Other Connections
Dial-up
When you use your device to dial up to your Internet Service Provider (ISP)
and connect to the Internet, you will be billed by the number of minutes
that you use.
To set up a dial-up connection to your ISP
To establish a dial-up connection on your device, you need the same
settings that you normally use when you dial up from your computer. This
includes the ISP server phone number, your user name and password.
1.
Tap
Start > Settings > Connections
tab
> Connections
.
2.
Under
T-Mobile Data
, tap
Add a new modem connection
.
3. On the Make New Connection screen, enter a name for the
connection.
4.
In the
Select a modem
list, select
Cellular Line
, then tap
Next
.
5.
Enter the ISP server phone number, then tap
Next
.
6.
Enter your user name, password, and any other information required
by your ISP.
7.
Tap
Finish
.
Work network connections
A Virtual Private Network (VPN) connection allows you to access your
company network through your device’s Internet connection. Whereas a
proxy connection lets you access the Internet using an existing connection
to your corporate or WAP network.