AT Commands
Page 202
+VGT - Voice Gain Transmit (Playback Volume)
This command causes the modem to set the volume level.
Syntax
+VGT=<level>
Defined Values
<level>
Decimal number corresponding to the volume level.
Reporting Current or Selected Values
Command:
+VGT?
Response:
<level>
Example:
128 For the default setting.
Reporting Supported Range of Parameter Values
Command:
+VGT=?
Response:
<level> range
Example:
0-255
Result Codes
OK <level> = 0-255.
ERROR Otherwise, or if not in Voice Mode.
+VIT - Voice Inactivity Timer (DTE/Modem)
This command sets the modem’s initial value for the DTE/modem inactivity timer.
Syntax
+VIT=<timer>
Defined Values
<timer>
Decimal number corresponding to the time in units of 1.0
second. A value of 0 disables the timer.
Reporting Current or Selected Values
Command:
+VIT?
Response:
<timer>
Example:
0
For the default setting.
Reporting Supported Range of Parameter Values
Command:
+VIT=?
Response:
<timer> range
Example:
0-255
Result Codes
OK <timer> = 0-255.
ERROR Otherwise, or if not in Voice Mode.
+VLS - Analog Source/Destination Selection
This command causes the modem to select one or more source/destinations of the
analog data.
Syntax
+VLS=<label>
Defined Values
<label>
Decimal number corresponding to the selected analog
source/destination hardware configuration (see Table A-33).
Reporting Current or Selected Values
Command:
+VLS?
Response:
<label>
Example:
0
For the default setting.
Reporting Supported Range of Parameter Values
Summary of Contents for SM9234D
