Synxcom SM9234D, User Manual

Page: 188 / 216

AT Commands
Page 188
BR = 5 14400 bit/s
WD = 0 1728 pixels,
LN = 2 unlimited length
DF = 0 1-D modified Huffman coding,
EC = 0 no ECM,
BF = 0 no BFT,
ST = 1 5 ms scan time.
+FLID= - Local ID String
Write syntax: +FLID="<local ID string>"
Valid value: 20-character ASCII string
Default value: Empty
If FLID is not a null string, it generates a TSI or CSI frame. Table 3/T.30 includes
digits 0-9, “+” and space.
If the DCE supports use of Table 3/T.30 only, the response to a +FLID=?
command is “(20) (32, 43, 48-57).” If the DCE supports printable ASCII <, the
response is: “(20) (32- 127)<CRLF>.” The first “(20)” represents string length: the
second (character values) field reports supported string values.
1. The string is saved in RAM.
2. Non-numeric characters are not filtered out.
3. The string is right justified.
+FCR - Capability to Receive
Write syntax: +FCR=<value>
Valid values: 0 or 1
Default value: 0
+FCR=0 indicates that the DCE will not receive message data. This can be used
when the DTE has insufficient storage. The DCE can send and can be polled for a
file.
+FCR is sampled in CCITT T.30 Phase A and Phase D.
+FPTS= - Page Transfer Status
Write Syntax: +FPTS=<ppr>
Valid values: 1, 2, 3, 4, 5
Default value: 0
The +FPTS parameter contains a value representing the post page response,
including copy quality and related end-of-page status. These values correspond to