Synxcom SM9234D, User Manual

Page: 131 / 216

AT Commands
Page 131
Default: 5
S26 - RTS to CTS Delay
S26 sets the time delay, in hundredths of a second, before the modem turns CTS
ON after detecting an OFF-to-ON transition on RTS when &R0 is commanded.
Pertains to synchronous operation only.
Range: 0-255 hundredths of a second
Default: 1
S27 - Bit Mapped Options Status
S27 indicates the status of command options.
Default: 73 (49h) (01001001b)
Bits 0,1,3 Synchronous/asynchronous selection (&Mn/&Qn)
31 0
0 0 0 = &M0 or &Q0
0 0 1 = &M1 or &Q1
0 1 0 =&M2 or &Q2
0 1 1 = &M3 or &Q3
10 0 = Reserved
1 0 1 = &Q5 (Default.)
11 0 = &Q6
Bit 2 Leased line control (&Ln)
0 = Dial up line (&L0) (Default.)
Bits 4 – 5 Internal clock select (&Xn)
0 = Internal clock (&X0) (Default.)
1 = External clock (&X1)
2 = Slave clock (&X2)
Bit 6 CCITT/Bell mode select (Bn)
0 = CCITT mode (B0)
1 = Bell mode (B1) (Default.)
Bit 7 Reserved
S28 - Bit Mapped Options Status
S28 indicates bit mapped options status.
Default: 0
Bits 0 - 1 Reserved
Bit 2 Reserved (always 0).
Bits 3 - 4 Pulse dialing (&Pn)
0 = 39%-61% make/break ratio at 10 pulses per second
(&P0) (Default.)
1 = 3%-67% make/break ratio at 10 pulses per
second (&P1)
2 = 39%-61% make/break ratio at 20 pulses per second
(&P2)
3 = 33%-67% make/break ratio at 20 pulses per second
(&P3)
Bit 5-7 Reserved