Swann AMI INSPECTOR Oxygen, Operator'S Manual

Page: 51 / 76

AMI INSPECTOR Oxygen
Program Overview
A-96.250.701 / 140716
49
Hysteresis 5.3.1.1.32
Delay 5.3.1.1.42
Sample Flow Flow Alarm 5.3.1.2.1
5.3.1.2* Alarm High 5.3.1.2.2*
Alarm Low 5.3.1.2.32*
Sample Temp. Alarm High 5.3.1.3.1*
5.3.1.3* Alarm Low 5.3.1.3.22*
Alarm Saturation Alarm High 5.3.1.4.1*
5.3.1.4* Alarm Low 5.3.1.4.22
Hysteresis 5.3.1.4.32
Delay 5.3.1.4.42
Case Temp. Case Temp. high 5.3.1.5.1*
5.3.1.5* Case Temp. low 5.3.1.5.2*
Relay 1/2 Function 5.3.2.1–5.3.3.1*
5.3.2* - 5.3.3* Parameter 5.3.2.20–5.3.3.20*
Setpoint 5.3.2.300–5.3.3.301*
Hysteresis 5.3.2.400–5.3.3.401*
Delay 5.3.2.50–5.3.3.50*
Input Active 5.3.4.1*
5.3.4* Signal Outputs 5.3.4.2*
Output/Control 5.3.4.3*
Fault 5.3.4.4*
Delay 5.3.4.5*
Miscellaneous Language 5.4.1*
5.4* Set defaults 5.4.2*
Load Firmware 5.4.3*
Password Messages 5.4.4.1*
5.4.4* Maintenance 5.4.4.2*
Operation 5.4.4.3*
Installation 5.4.4.4*
Sample ID 5.4.5*
Interface Protocol USB Stick
5.5* 5.5.1* * Menu numbers