AMI INSPECTOR Oxygen
Product Description
A-96.250.701 / 140716
7
2.
Product Description
This chapter contains technical data, requirements and perfor-
mance data.
2.1.
Description of the System
The portable AMI INSPECTOR instrument is a complete monitoring
system mounted on a small panel with supporting stand and a re-
chargeable battery for stand-alone operation (>24h), designed as
an inspection equipment for quality assurance of online process
monitors.
Features
General Features of AMI INSPECTORs are:
Battery life after full charge:
– >24h at full load (use of 3 relays, USB, signal output, logger)
– >36h at minimum load (use of logger only)
Charging time: approx. 6 hours
Controlled shut-down if battery is empty.
Display of remaining battery life in hours.
For longer battery life the back light of the LC Display is dis-
abled.
Continuous operation using power adapter. The battery
should be discharged at least once a month (normal usage
until the monitor automatically shuts down).
Battery
The Li-Ion battery is located in the housing of the AMI transmitter.
See chapter
Power Supply, p. 19
regarding power supply and
charging of the battery.
Safety features
No data loss after power failure, all data is saved in non-volatile
memory. Over voltage protection of in- and outputs.
Galvanic separation of measuring inputs and signal outputs.
USB interface
Built in USB interface for logger download. Use the USB stick sup-
plied by Swan only (other USB sticks can dramatically reduce bat-
tery life).
Signal Output
(optional)
One signal output programmable for measured values (freely
scaleable, linear or bilinear) or as continuous control output (control
parameters programmable).
Current loop:
0/4–20 mA
Maximal burden:
510