AMI INSPECTOR Oxygen
Installation
A-96.250.701 / 140716
19
3.5.1
Power Supply
Contrary to all other Swan online process monitors the
AMI INSPECTOR transmitter is supplied with power by battery on-
ly. The rechargeable battery (Li-Ion) enables a stand-alone opera-
tion for at least 24 hours.
WARNING
Do not provide power directly to the transmitter as this will de-
stroy the motherboard. All AMI INSPECTOR transmitters are
supplied with power by battery only.
Charging
Use the original supplied power adapter to charge AMI INSPEC-
TOR only. Charging time: approx 6h.
Fully charged a stand-alone operating time of at least 24h is guar-
anteed:
>24h at full load (use of 3 relays, USB, signal output, logger)
>36h at minimal load (use of logger only)
In case that the battery is discharged completely the firmware will
automatically shut down.
Switch Power
ON - OFF
Switch the instrument ON or OFF using the toggle switch on the
transmitter.
Continuous
operation
For continuous operation use the power adapter as well.
CAUTION
If the AMI powers ON and then immediately shuts OFF, the
battery is empty. Do not hold the toggle switch in ON position,
as this can damage the battery.
CAUTION
During charging protect from heat impact and keep splash-
proof (plug of power adapter is not IP66).
Do not supply external devices, e.g. pumps, magnetic valves
or any other current consumers with AMI INSPECTOR
CAUTION
Use the original supplied power adapter to charge AMI IN-
SPECTOR only. Use of any other power adapter can damage
the battery or cause malfunction.
