AMI INSPECTOR Oxygen
Maintenance
A-96.250.701 / 140716
41
6.8.
Replacing the Battery
1
Switch the AMI Inspector off.
2
If connected, disconnect the power adapter from the power jack.
3
Open the transmitter housing.
4
Pull out the ribbon cable [C] from the mainboard.
5
Disconnect battery plug [B] and replace the battery.
6.9.
Longer Stop of Operation
1
Shut off power of the instrument.
2
Stop sample flow.
3
Remove the Swansensor Oxytrace G.
4
Clean the sensor with a soft tissue and rinse it with water after-
wards.
5
Use a soft brush to remove the dirt which sticks on the walls of
the flow cell.
6
Fill the flow cell with water.
7
Install the Swansensor Oxytrace G.
A
B
C
Battery
Battery plug
Ribbon cable
C
B
A
