AMI INSPECTOR Oxygen
Program List and Explanations
A-96.250.701 / 140716
51
2.2.1.4
Cal. History
Review the diagnostic values of the last calibration of the oxygen
sensor. Max. 64 data records are memorized.
Number
: Calibration counter.
Date, Time
: Date and time of the calibration.
Sat. Current
: Saturation current at that time of calibration.
Air pressure
: Air pressure at that time of calibration.
2.2.2
Miscellaneous
:
2.2.2.1
Case Temp:
Shows the actual temperature in °C inside the
transmitter.
Air pressure
: Shows the actual air pressure in hPa
2.2.3
QA History
Review QA values (Number, Date, Time, Deviation oxygen,
Deviation Temperature, Status of QA check) of the last quality
assurance procedures.
2.3 Sample
2.3.301
Sample ID
:
Shows the assigned sample identification. This
identification is defined by the user to identify the location of the
sample
Temperature:
Shows temperature in °C.
(Nt5K)
: Shows raw value of the temperature in
Sample Flow
: Shows the sample flow in l/h
(Raw value)
Shows the sample flow in Hz
2.4 I/O State
Shows actual status of all in- and outputs.
2.4.1
2.5 Interface
2.5.1
Protocol USB Stick.
Alarm Relay:
Active or inactive
Relay 1 and 2:
Active or inactive
Input:
Open or closed.
Signal Output 3:
Actual current in mA (if option is installed)
