Suzuki WagonR+ RB310, Service Manual

Page: 2959 / 3086

8G-24 IMMOBILIZER CONTROL SYSTEM
NUMBER OF FC
1
TRANS SKC
REGISTERED
TRANSPONDER
F0: REGI FC/SKC
F1: REGI FC
SEL PASSWORD MOD
F0: INPUT
F1: REGISTER
HOW TO REGISTER IGNITION KEY
Register ignition key with built-in transponder by performing the fol-
lowing procedure.
NOTE:
Registering secret key to ignition key with built-in transponder
is able only once.
1) Perform IMMOBILIZER SYSTEM COMPONENTS REGISTRA-
TION FLOW TABLE.
2) Prepare ignition key with built-in transponder to be registered for
the vehicle.
NOTE:
As up to 5 ignition keys may be used for immobilizer control
system, make sure that total number of ignition keys that
are used for the vehicle is 5 or less.
3) Prepare SUZUKI scan tool and immobilizer cartridge. Connect
SUZUKI scan tool to DLC with ignition switch at OFF position.
NOTE:
For operation procedure of SUZUKI scan tool, refer to its
operator ’ s manual.
4) Insert ignition key with built-in transponder to be registered to
key cylinder and turn ignition switch to ON (
II
) position.
5) Check scan tool DATA LIST for “ NUMBER OF FC ” , “ TRANS
SKC ” and “ FIX CODE ” .
Turn ignition switch at OFF position and input password. If 5 igni-
tion keys are already registered, clear all FIX CODEs registered
in immobilizer control module by executing “ CLEAR FC ” com-
mand in IMMOBI CONT menu with scan tool.
6) If FIX CODE is already registered in immobilizer control module
and secret key in transponder is not registered, execute
“ CLEAR FC ” command with scan tool.
7) By using scan tool, register FIX CODE (FC) to immobilizer con-
trol module and register secret key (SKC) to transponder by
executing REGI FC/SKC command in TRANSPONDER under
SELECT MODE menu with ignition switch at OFF position.
If secret key is already registered in ignition key with built-in
transponder, register FIX CODE by executing
“ REGI FC ” at
TRANSPONDER menu under SELECT MODE with ignition
switch at OFF position.
8) After completing registration, turn ignition switch to ON position
and check that registration is executed correctly by monitoring
“ FIX CODE REGISTERED ” and “ TRANS SKC REGISTERED ”
displayed on scan tool DATA LIST.
9) If there is other keys to registered, perform steps 4) to 8).
HOW TO REGISTER PASSWORD
1) Perform IMMOBILIZER SYSTEM COMPONENTS REGISTRA-
TION FLOW TABLE.
2) Prepare SUZUKI scan tool and immobilizer cartridge. Connect
Suzuki scan tool to DLC with ignition switch at OFF position.
NOTE:
For operation procedure of SUZUKI scan tool, refer to its
operator
’ s manual.
3) Register password by performing REGISTER in SEL PASS-
WORD MOD menu.