Suzuki WagonR+ RB310, Service Manual

Page: 167 / 3086

L17
L14
L22
L25
(K01)
L13
(R01)
L31
(G08)
L21
L20
(J15)
L18
L19
L12
L26
(G07)
L27
L06
L07 L08
L02
(O02) L01
L10
L11
L03
(O01)
L30
(K03)
L32
8A-1-8 HOW TO USE THIS MANUAL
When necessary to know the location of an electrical part or an intermediate connector, it is easily possible to
retrieve it by this diagram.
First consult “SYSTEM CIRCUIT DIAGRAM” section or connector table at the right hand pages of this section for
the questioned connector code. Second refer to the diagrams of this section and look for the same code.
More information on use of the code is illustrated below.
This indicates the ground point No.
The same No. is used as the ground point. (For the
details, refer to "GROUND POINT" section)
This indicates the connector code.
The connector code in the parentheses ( ) has the
same meaning as the above intermediate connec-
tor and at the same time, it indicates that there is a
harness continuity between pages or illustrations in
“CONNECTOR LAYOUT DIAGRAM” section. That
is, it suggests that the harness is continued to the
other page or illustration and the continued harness
can be identified by the same connector code.
Connector code
L 0 1
Connector No (serial No : 01)
Harness symbol (Refer to the table below)
Harness symbol and corresponding harness name
A : Battery harness K : Roof wire
B : A/C harness L : Floor harness
C : Engine harness N : Rear defogger wire
D : Injector harness O : Back door harness•Hi mount stop lamp wire
E : Main harness Q : Air bag harness
G : Instrument panel harness R : Fuel pump harness
J : Door harness
}
HOW TO READ CONNECTOR LAYOUT DIAGRAM