Suzuki WagonR+ RB310, Service Manual

Page: 1053 / 3086

7B1-88 AUTOMATIC TRANSAXLE (M13 ENGINE MODEL)
E12
6 WHT
Input shaft speed sensor
(+)
2 – 3 V
Ignition switch turned ON, engine
stops.
(Reference
waveform
No.1)
While engine running.
(Output signal is waveform. Wave-
form frequency varies depending on
output shaft speed. (16 pulses are
generated par 1 input shaft revolu-
tion.))
7 GRN/RED
Transmission range sen-
sor (
“ D ” range)
8 – 14 V
Ignition switch ON, selector lever at
“ R ” range
0 – 1 V
Ignition switch ON, selector lever at
other than
“ R ” range
8 BUL/YEL
Transmission range sen-
sor (
“ N ” range)
8 – 14 V
Ignition switch ON, selector lever at
“ N ” range
0 – 1 V
Ignition switch ON, selector lever at
other than
“ N ” range
9 BLU/RED O/D OFF switch
0 – 1 V O/D OFF switch pressed
8 – 14 V O/D OFF switch released
10 – – – –
11 BLU/YEL “ O/D OFF ” light
0 – 1 V Ignition switch ON (lamp turned ON)
8 – 14 V Ignition switch ON (lamp turned OFF)
12 – – – –
13 – – – –
14 – – – –
15 – – – –
16 BLK
Input shaft speed sensor
(
– )
2 – 3 V Ignition switch ON, engine at stop
17 – – – –
18 GRN/BLK
Transmission range sen-
sor (
“ L ” range)
8 – 14 V
Ignition switch ON, selector lever at
“ L ” range
0 – 1 V
Ignition switch ON, selector lever at
other than
“ L ” range
19 GRN
Transmission range sen-
sor (
“ 2 ” range)
8 – 14 V
Ignition switch ON, selector lever at
“ 2 ” range
0 – 1 V
Ignition switch ON, selector lever at
other than
“ 2 ” range
20 ORN
Transmission range sen-
sor (
“ P ” range)
8 – 14 V
Ignition switch ON, selector lever at
“ P ” range
0 – 1 V
Ignition switch ON, selector lever at
other than
“ P ” range
21 – – – –
22 – – – –
23 WHT/RED Data link connector 8 – 14 V Ignition switch ON
24 – – – –
25 YEL
Output shaft speed sen-
sor (VSS)
8 – 14 V Ignition switch ON
0 – 1 V
↑↓
10 – 14 V
(Reference
waveform
No.2)
Vehicle running.
(Sensor signal is pulse. Pulse fre-
quency varies depending on vehicle
speed.)
26 – – – –
Con-
nector
Terminal
number
Wire color Circuit
Normal
Voltage
Condition