Suzuki WagonR+ RB310, Service Manual

Page: 2239 / 3086

ADD BALANCE
WEIGHTS HERE
HEAVY SPOT
WHEEL TRAMP
C / L
OF SPINDLE
CORRECTIVE WEIGHTS
ADD BALANCE
WEIGHTS HERE
C / L OF
SPINDLE
CORRECTIVE WEIGHTS
HEAVY SPOT
WHEEL SHIMMY
3F-6 WHEELS AND TIRES
After mounting, inflate to specified pressure shown on tire placard
so that beads are completely seated.
WARNING:
Do not stand over tire when inflating. Bead may break when
bead snaps over rim
’ s safety hump and cause serious per-
sonal injury.
Do not exceed specified pressure when inflating. If speci-
fied pressure will not seat beads, deflate, re-lubricate and
reinflate.
Over inflation may cause bead to break and cause serious
personal injury.
Install valve core and inflate to proper pressure.
TIRE REPAIR
There are many different materials and techniques on the market
to repair tires. As not all of these work on all types of tires, tire
manufacturers have published detailed instructions on how and
when to repair tires. These instructions can be obtained from each
tire manufacturer.
BALANCING WHEELS
There are two types of wheel and tire balance: static and dynamic.
Static balance, as shown in left figure, is the equal distribution of
weight around the wheel. Wheels that are statically unbalanced
cause a bouncing action called tramp. This condition will eventually
cause uneven tire wear.
Dynamic balance, as shown in left figure, is the equal distribution
of weight on each side of the wheel centerline so that when the tire
spins there is no tendency for the assembly to move from side to
side. Wheels that are dynamically unbalanced may cause shimmy.