Suzuki RV125, Service Manual

Page: 67 / 251

ENGINE 3-31
• Install the valve springs with the smaller pitch
A
facing the
cylinder head.
• Install the valve spring retainer
1
, press down the spring
using the valve lifter and then install the cotter halves onto the
valve stem end. Then, release the valve lifter to allow the cot-
ters
2
to wedge between the retainer and the valve stem. Be
sure that the rounded lip
3
of the cotter fits snugly into the
groove
4
in the stem end.
%
09916-14510: Valve lifter
09916-14910: Valve lifter attachment
09916-84511: Tweezers
"
INTAKE PIPE
• When installing the intake pipe, apply grease to the O-ring.
(
99000-25010: SUZUKI SUPER GREASE “A”
"
NOTE:
Make sure that the protrusion
A
comes to the right side.
Towards
Cylinder
head
Be sure to install all of the parts in their original posi-
tions.
Use the new O-ring to prevent sucking air from the
joint.