CHASSIS 5-13
CALIPER INSPECTION
Inspect the caliper cylinder wall and piston surface for scratch,
corrosion or other damages.
If any abnormal condition is noted, replace the caliper assembly
with a new one.
CALIPER REASSEMBLY
Reassemble and remount the brake caliper in the reverse order
of removal and disassembly. Pay special attention to the follow-
ing points:
Wash the caliper bore and piston with the specified brake fluid.
Thoroughly wash the dust seal groove and piston seal groove.
!
)
Specification and classification: DOT 4
PISTON SEALS
• Install the piston seal
1
and dust seal
2
as shown.
RUBBER PARTS
• Replace the removed rubber parts with new ones.
* Wash the brake caliper components with new brake
fluid before reassembly. Do not wipe the brake fluid
off after washing the components with rag.
* Replace the removed piston seals and dust seals
with new ones. Apply brake fluid to all of the seals,
brake caliper bores and pistons before reassembly.
Summary of Contents for RV125
