Suzuki RV125, Service Manual

Page: 108 / 251

FUEL AND LUBRICATION SYSTEM 4-7
• Remove the float pin
1
.
• Remove the floats
2
along with the needle valve
3
.
#
• Remove the main jet
4
, needle jet holder
5
, needle valve
seat
6
and pilot jet
7
.
• Remove the needle jet
8
.
• Remove the starter plunger
9
.
• Use a 1/8" size drill bit with a drill-stop to remove the pilot screw
plug. Set the drill-stop 6 mm from the end of the bit to prevent
drilling into the pilot screw. Carefully drill through the plug.
• Thread a self-tapping sheet metal screw into the plug. Pull on
the screw head with pliers to remove the plug. Carefully clean
any metal shavings from the area.
#
Do not use wire to clean the valve seat and jets.
Replace the plug with a new one.
Drill-stop
Pilot
screw
Plug
Carburetor
body