CHASSIS 5-49
• Press the dust seals into the swingarm pivot by using the spe-
cial tool and suitable size socket wrench
2
.
"
09924-84521: Bearing installer
NOTE:
Press the swingarm dust seals at 5 mm depth from the swing-
arm edge.
SWINGARM PIVOT SHAFT INSTALLATION
REMOUNTING
Remount the rear swingarm and suspension in the reverse order
of removal. Pay attention to the following points:
• Tighten the swingarm pivot nut to the specified torque.
'
Swingarm pivot nut: 65 N·m (6.5 kgf-m)
• Install the rear shock absorber. (
#
5-44)
• Install the rear wheel. (
#
5-37)
FINAL INSPECTION AND ADJUSTMENT
After installing the rear suspension and wheel, the following
adjustments are required before driving.
* Drive chain (
#
2-12)
* Rear brake (
#
2-16)
* Chassis bolts and nuts (
#
2-20)
* Rear suspension (
#
2-19)
5 mm
8 mm
Bushing
65 N.m
(6.5 kgf-m)
Summary of Contents for RV125
