Suzuki RV125, Service Manual

Page: 93 / 251

ENGINE 3-57
• Install the clutch sleeve hub nut, and tighten it to the specified
torque with the special tool.
#
Clutch sleeve hub nut: 50 N·m (5.0 kgf-m)
%
09920-53740: Clutch sleeve hub holder
• Bend the lock washer
1
securely.
• Install the clutch push rod
2
as shown in the illustration.
A
Push piece side
• Apply engine oil to the bearing.
• Install the push piece
3
, bearing
4
and washer
5
.
• Install the clutch drive and driven plates one by one into the
clutch sleeve hub.
• Install the clutch pressure plate
6
, clutch springs and clutch
spring mounting bolts.
• Hold the generator rotor nut and tighten the clutch spring
mounting bolts in a crisscross pattern.
NOTE:
Make sure that the clutch pressure plate is installed correctly.
• Loosen the lock nut
7
, and turn in the release screw
8
to
feel resistance.
• From that position, turn out the release screw
8
,
turn, and
tighten the lock nut
7
by holding the release screw
8
.