Suzuki Grand Vitara 1998, Service Manual

Page: 551 / 801

YH4
GRAND
VITARA
INSTRUMENTATION / DRIVER INFORMATION 8C-9
1. Exhaust pipe
FUEL METER/FUEL GAUGE UNIT
FUEL METER
INSPECTION
1) Remove rear bumper facing.
2) Detach grommet (3) from vehicle.
3) Disconnect coupler (2) of fuel pump and gauge.
4) Turning switch ON, and check that fuel meter indicates E.
5) Turn ignition switch OFF.
6) Ground Bl / W lead through a 3.4 W test bulb (4) as illustrated.
7) Turn ignition switch ON and check that bulb light up and pointer
(5) moves to F side.
8) If fuel meter shows no operation, repair or replace defective
parts.
FUEL SENDER GAUGE
INSPECTION
1) Remove fuel pump assembly (1) referring to FUEL PUMP RE-
MOVAL in Section 6C.
2) Check resistance between terminals (A) and (B) under each
float position.
Float Position
Fuel
Resistance ( )
56 model 66 model
Meter
Resistance ( )
“a”
88.3 mm
(3.48 in.)
51.7 mm
(2.04 in.)
F 6 – 8
“b”
157.2 mm
(6.20 in.)
139.6 mm
(5.50 in.)
1 / 2 29.5 – 35.5
“c”
254.9 mm
(10.0 in.)
254.9 mm
(10.0 in.)
E 94 – 96
If measured valve is out of specification, replace fuel sender gauge.